TOYOTA Highlander Wheel Lug Pattern and Fitment Guide
The TOYOTA Highlander wheel lug pattern specifies the number of lug holes and the pitch circle diameter (PCD) essential for proper wheel fitment. Most Highlander models use a 5×114.3 mm lug pattern, but slight variations in offset ET and center bore can occur depending on the model year.\n\nOffset ET values for the TOYOTA Highlander typically range between 30 to 45 mm, affecting the wheel’s positioning relative to the suspension and fender. The center bore size usually measures 60.1 mm, matching the vehicle’s hub diameter for a secure fit.\n\nRim sizes suitable for the Highlander vary from 17 to 20 inches in diameter and widths from 7 to 8.5 inches depending on trim and year. Selecting the correct bolt pattern, offset, and center bore ensures safe installation and optimal performance.\n\nFor those referencing TOYOTA Highlander wheel fitment, consulting year-sorted specifications is critical to verify compatibility, avoid clearance issues, and achieve desired aesthetics and handling characteristics.
| Make / model / trim | Year | Tire | Rim width (in) | Rim diam. (in) | Bolt pattern | Offset ET | Bore DIA | Mounting |
|---|---|---|---|---|---|---|---|---|
| TOYOTA Highlander Hybrid Limited | 2026 | 235/55R19 | 7.5 | 19 | 5×114.3 | 35 | 19 | M12*1.5 |
| TOYOTA Highlander Hybrid Platinum | 2025 | 235/50R20 | 8 | 20 | 5×114.3 | 35 | 20 | M12*1.5 |
| TOYOTA Highlander Hybrid XLE | 2024 | 235/55R19 | 7.5 | 19 | 5×114.3 | 35 | 19 | M12*1.5 |
| TOYOTA Highlander Hybrid LE | 2023 | 225/65R17 | 7 | 17 | 5×114.3 | 35 | 17 | M12*1.5 |
| TOYOTA Highlander Platinum | 2022 | 235/50R20 | 8 | 20 | 5×114.3 | 35 | 20 | M12*1.5 |
| TOYOTA Highlander Limited | 2021 | 235/55R19 | 7.5 | 19 | 5×114.3 | 35 | 19 | M12*1.5 |
| TOYOTA Highlander XLE | 2020 | 225/60R18 | 7.5 | 18 | 5×114.3 | 35 | 18 | M12*1.5 |
| TOYOTA Highlander LE | 2019 | 225/65R17 | 7 | 17 | 5×114.3 | 35 | 17 | M12*1.5 |
FAQ
- What is the standard wheel lug pattern for the TOYOTA Highlander?
- The standard wheel lug pattern for most TOYOTA Highlander models is 5×114.3 mm.
- Why is the offset ET important for Highlander wheel fitment?
- Offset ET affects wheel positioning and clearance, ensuring the wheel does not interfere with suspension or fenders on the Highlander.
- Can I use rims with a different center bore on my TOYOTA Highlander?
- Using rims with a different center bore than the Highlander’s 60.1 mm size can cause fitment issues; hub-centric rings may be required to ensure proper alignment.
Tire size calculatorShow
Compare two tire sizes — diameter, speedometer error, and clearance change.